AUDI

A

 

.
Description:

  • For year 2010+
  • Carbon fiber air intake for Audi A1
  • EA111 engine
  • Direct bolt-on design without any modification 
  • No remapping of ECU/DME needed
 
Accessories:  Front air scoop, Airbox, MAF sensor pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.

 

 

Description:

  • Carbon fiber intake for Audi A3 8P
  • Direct bolt-on design no modification needed
  • No remapping of ECU/DME needed

Accessories: Airbox, Air duct, Pipe, Silicon pipe, Arma Filter, Fixtures & Accessories.

Description:

  • Carbon fiber intake for Audi A3 8V 1.4
  • Direct bolt-on design no modification needed
  • No remapping of ECU/DME needed

Accessories: Airbox, Air duct, Pipe, Silicon pipe, Arma Filter, Fixtures & Accessories.

Description:

  • Carbon fiber intake for Audi A3 8V
  • EA888 engine
  • Direct bolt-on design no modification needed
  • For year 2012+
  • No remapping of ECU/DME needed

Accessories: Air duct, Airbox, Pipe, Silicon pipe, Arma Filter, Fixtures & Accessories.

Description:

  • Carbon fiber intake for Audi A4 B9 2.0T
  • Direct bolt-on design no modification needed
  • For year 2015+
  • No remapping of ECU/DME needed

Accessories: Front air scoop, Airbox, MAF sensor pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.

Description:

  • Carbon fiber intake for A4 B8 2.0T / A5 B8 2.0T
  • Direct bolt-on design no modification needed
  • For years 2007-2014
  • No remapping of ECU/DME needed
 
Accessories: Front air scoop, Airbox, MAF sensor pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.
Description:

  • Carbon fiber intake for Audi A7
  • 3.0T engine
  • Direct bolt-on design no modification needed
  • For year 2012+
  • No remapping of ECU/DME needed
Accessories: Airbox, Pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.

Description:

  • Carbon fiber intake for Audi S3 8V
  • EA888 engine
  • Direct bolt-on design no modification needed
  • For year 2012+
  • No remapping of ECU/DME needed

Accessories: Air duct, Airbox, Pipe, Silicon pipe, Arma Filter, Fixtures & Accessories.

Description:

  • Carbon fiber intake for Audi S4 B8 / S5 B8
  • Direct bolt-on design no modification needed
  • Approx. +12hp / 10Nm (peak output)
  • For years 2009-2016
Accessories: Airbox, Front air scoop, Pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.
Description:

  • Carbon fiber intake for Audi S6
  • Direct bolt-on design no modification needed
  • For year 2013+
  • No remapping of ECU/DME needed
  • About 30 BHP gain at 6000 RPM
 
Accessories: Carbon induction chamber, Intake pipe, Arma Filter, Fixtures & Accessories.

RS

The latest five-cylinder powerplant carries on the tradition of Audi Sport® performance. The Audi RS 3 Sedan features a 2.5-liter TFSI® turbocharged engine that’s known for its unique firing order and inimitable sound, producing 400 horsepower and 354 lb-ft of torque. The distinct engine note can be controlled by opening the flaps of the standard RS exhaust system.
Description:

  • Carbon fiber air intake for Audi RS3 8.5V
  • Direct bolt-on design, no modification needed
  • For year 2017+
  • No remapping of ECU/DME needed

Accessories: Carbon induction chamber, Intake pipe, Arma Filter, Fixtures & Accessories.

Suited for engine upgrade, the sole purpose of this kit is to achieve maximum air intake capacity and greatly lower the air temperature going into the combustion chamber. ARMA understand driver’s lack of satisfaction with the OEM intake setup by creating an intake system to produce the maximum gain in corresponding with driver’s desire of power upgrades down the road. Every set of ARMA RS3 intake kit comes with an air filter that is capable of an engine output up to 750HP. Achieving an increase in airflow by decreasing the intake pipe’s diameter from 120mm to 96mm. The full carbon fiber constructed airbox not only act as heat isolator, it is also fitted with patented ARMA’s exclusive hot-air dissipation feature that is capable of dissipating stored heat in the shortest time possible. The complete intake kit includes the front mount air inlet duct to ensure maximum airflow for engine output up to 750HP. With ARMA RS3 Intake System the driver can expect and feels the extra gains from an ECU tuning and turbo upgrades.
Description:

  • Carbon fiber air intake for Audi RS3 8V
  • CZGB engine. Approx 16HP at 5,500 RPM
  • Direct bolt-on design, no modification needed
  • For year 2015+
  • No remapping of ECU/DME needed
  • For years 2009-2016
 
Accessories: Carbon induction chamber, Intake pipe, Arma Filter, Fixtures & Accessories.
Description:

  • Carbon fiber intake for Audi RS5
  • Direct bolt-on design no modification needed
  • For year 2013+
  • No remapping of ECU/DME needed
Accessories: Carbon induction chamber x 2, Intake pipe x 2, Arma Filter x 2, Fixtures & Accessories.
RS, a badge wore only by the highest performance models by Audi and the RS6 stands out from the group as the world fastest production sports hatchback. It is apparent that drivers will not stop pursuing better and more effective upgrades for their vehicles, in order to create an intake system with max air efficiency we had to upgrade the stock design by utilizing the largest air intake space available. ARMA’s RS6 intake system is fitted with a half-opened heat shield and improve the stock 2 to 1 intake pipe with larger diameter, the complete intake box is constructed with high-level of carbon fiber forming, as the result, the RS6 intake system achieved a maximum airflow providing the engine with 100% cold concentrated air and the full system can easily be fitted to an engine setup up to 750 HP. The full kit comes ready to install with all the hard wares, no other upgrades are required.

Description:

  • Carbon fiber intake for Audi RS6 / RS7 C7
  • Direct bolt-on design no modification needed
  • For year 2013+
  • No remapping of ECU/DME needed
Accessories: Carbon induction chamber, Intake pipe, Arma Filter, Fixtures & Accessories.

TT

Description:

  • Carbon fiber air intake for Audi TT 8S 45 TFSI
  • EA888 Engine
  • Direct bolt-on design no modification needed
  • Approx. +10hp / 12Nm (peak output)
  • For year 2014+
  • No remapping of ECU/DME needed-Around 10 horsepower peak gain.
 
Accessories: Front air scoop, Airbox, Pipe, Arma Filter, Silicon pipe, Fixtures & Accessories.